Oxylos O2

Automated O2 gas analyser without consumables

The OXYLOS O2 allows you to measure the rate of O2 all types of containers and packaging, with protective atmosphere, and without having to use any consumables (no need to use needles or septums). Automated and safe, the OXYLOS can be adapted to your production constraints, providing you with sampling tools and customised positioning. The high-end analyser from the ABISS brand provides you with solutions for packaging when space above the contents is limited. Able to be synchronised to the packaging line, the OXYLOS becomes autonomous and does not require an operator in order to carry out measurements. This analyser is ideal for production.


  • No consumable
  • Fully hand safe
  • Laser positionning tool for sample
  • Can be synchronised to conveyors
  • Fully traceable via an internal spreadsheet
  • The needles are cleaned automatically
  • Remote maintenance 7 days a week, with remote connection available

Expert advices

  • The calibrated leaks make periodic verifications easy to carry out.
  • Check that there is enough space above the product in order to carry out the measurement or use our specially adapted needles and accessories.
  • We would recommend optimising the measurement speed depending on the target you wish to reach.
  • We would advise you to regularly save the data you have collected and to secure any power supplies.

News video

How to measure the oxygen content of your packaging without consumables? The response with the OXYLOS analyzer. We present the complete test and the benefits. The test is carried out on a soft packaging.

Product informations

Custom placement toolsyes
Ingress protection of enclosureIP 41
Measurement deviceBench-mounted
EnclosureAcier inox
Weight27 kg
Width560 mm
Height495 mm
Depth473 mm
Power100-240VAC -50/60Hz - 63W
Feed pressure4 to 8 Bar (dry and oil free filtred to 20 µm) filtered at 20μm
Inlet pneumatic connection diameter4 x 6 mm tube connection
Memory capacity4 to 32go
DisplayColor touchscreen 7’’
Digital interfaces1 USB 2.0 and 1 Ethernet RJ45
Storage conditions0 - 70°C/0 - 90% HR
Terms of use0 - 40°C/10 - 90% HR
O2 Oxygen measurementTechnology : Electrochemical
Precision : +/- 1% relative 
T90 response time : < 1 s
Resolution : 0.01%
Average service life : 18 months in air
Blocked circuit detectionyes
Pump suction controlyes
Compensation for atmospheric pressure variationsyes
Results storageyes
USB Connectionyes
TraceabilityFormat, line, operator, batch number, comment at the end of the test
Remote ConnectionRemote control possible for remote maintenance
Network connection (Ethernet socket)yes
Synchronised automatic triggeringyes
Automatic non-septum testyes
Needles automatic cleaningyes
OptionsNew: Injection gases are continuously monitored
Online device synchronised with the conveyor
3G router + HMI Advanced
Can interface with ERPs
2nd Ethernet port to isolate the internal from the external network
  • USB - 1D barcode reader
  • Filter for the expansion valve and oil separator of the compressed air supply
  • Detectable stylus for the touchscreen
  • Placement tool
  • Hopper reduction accessory (small formats)
  • Needle cleaning tool
  • Calibration certificate
  • 1 carry case
  • 2 Needles with the bellows
  • Metal detected stylus
  • 1 Regulator filter for compressed air
  • 1 Mains cord
  • User manual
Back to top