Oxylos® Leak and Burst Tester

Automated system for measuring micro-leaks and packaging sealing resistance

The Oxylos® Leak and Burst Tester allows you to measure the airtightness across all types of containers and packaging, without protective atmosphere, and without having to use any consumables (no need to use needles or septums). Automated and safe, the Oxylos® Leak and Burst Tester can be adapted to your production constraints, providing you with sampling tools and customised positioning. The high-end analyser from the ABISS brand provides you with solutions for packaging when space above the contents is limited. Able to be synchronised to the packaging line, the Oxylos® Leak and Burst Tester becomes autonomous and does not require an operator in order to carry out measurements. This analyser is ideal for production.


  • Meets standards:
    DIN 55508-1: measures flow rate at constant pressure
    ASTM F1140: seal strength
    ASTM F2054: burst test
  • No consumable
  • Fully hand safe
  • Laser positionning tool for sample
  • Can be synchronised to conveyors
  • Effective hole size calculation down to 5 μm
  • Fully traceable via an internal spreadsheet
  • The needles are cleaned automatically
  • Remote maintenance 7 days a week, with remote connection available

Expert advices

  • The calibrated leaks make periodic verifications easy to carry out.
  • Check that there is enough space above the product in order to carry out the measurement or use our specially adapted needles and accessories.
  • We would recommend optimising the measurement speed depending on the target you wish to reach.
  • We would advise you to regularly save the data you have collected and to secure any power supplies.

News video

Watch the video of the OXYLOS, the leak automated analyzer. We present you a complete test realized with this analyzer. The test is performed on a soft packaging package without septums.

Product informations

Custom placement toolsyes
Ingress protection of enclosureIP65 connectivity
Measurement deviceBench-mounted
EnclosureStainless steel
Weight28 kg
Width560 mm
Height495 mm
Depth473 mm
Power100-240VAC -50/60Hz - 63W
Feed pressure4 to 8 Bar (dry and oil free filtred to 20 µm) filtered at 20μm
Inlet pneumatic connection diameter4 x 6 mm tube connection
Memory capacity4 to 32go
DisplayColor touchscreen 7’’
Digital interfaces1 USB 2.0 and 1 Ethernet RJ45
Storage conditions0 - 70°C/0 - 90% HR
Terms of use0 - 40°C/10 - 90% HR
Pressure measurementyes
Leak measurementTechnology : Mass flowmeter
Precision : +/- 0.8% full scale (μm) ; +/- 1% of the reading + 0.1 ml/min
Resolution : 0.1ml/min - 1μm
Measurement : 0.1-500 ml/min - 5 μm to 500 μm
Test pressure : From 10 to 500 mbar +/- 1mbar
Flow : Filling: 4200 ml/min
Compressed air supply : 4 to 8 Bar (dry and oil free filtred to 20 µm)
Analytical curves (displayed and recordable)
Burst testTechnology : Barometric
Accuracy : +/- 0,5% full scale
Resolution : 1mbar
Flow scales : 0,2 – 1,4 bar
Quick inflating flow : Minimum 250l/h
Burst pressure : Up to 1,4 bar
Analytical curves (displayed and recordable)
Creep test
Technology : Barometric
Accuracy : +/- 0,5% full scale
Resolution : 1mbar
Measurement : 200 - 500 mbar
Pressure : 500 mbar
Flow : Filling: 4200 ml/min
Analytical curves (displayed and recordable)
Blocked circuit detectionyes
Results storageyes
USB Connectionyes
TraceabilityFormat, line, operator, batch number, comment at the end of the test
Remote ConnectionRemote control possible for remote maintenance
Network connection (Ethernet socket)yes
Synchronised automatic triggeringyes
Automatic non-septum testyes
Needles automatic cleaningyes
OptionsOnline device synchronised with the conveyor
3G router + HMI Advanced
Can interface with ERPs
2nd Ethernet port to isolate the internal from the external network
  • 2.5 L buffer tank with check valve
  • Calibrated leak
  • USB - 1D barcode reader
  • Filter for the expansion valve and oil separator of the compressed air supply
  • Detectable stylus for the touchscreen
  • Placement tool
  • Hopper reduction accessory (small formats)
  • Needle cleaning tool
  • Calibration certificate
  • Mains cord
  • Metal detectable stylus
  • 2 L buffer tank with air conditioner, pressure reducer and switching valve
Back to top